DIY Christmas Decoration - A Beautiful Ribbon Christmas Tree
Christmas is budgeted, and so it'southward the perfect time to start upwardly on those actually cute DIY ornament projects. Our idea today is to make a beautiful ribbon Christmas tree! It'southward going to be a neat projection to take on even with kids around.
Non simply will this be easy to brand, simply information technology's likewise going to be a super cute addition to your Christmas decor this yr! Plus, you can make more than of these and even include them with the gift baskets you give out to your friends and family.
Ribbon Christmas Tree Materials
If yous desire to make your very ain ribbon Christmas tree yous're going to need a few tools and materials, so permit'due south come across what exactly y'all take to go digging for in your craft box or at the store.
- white cardboard
- scissors
- pencil
- mucilage gun
- silk ribbons – 3 different colors/patterns
- star decor
Ribbon Christmas Tree Instructions
Earlier we fifty-fifty become started, nosotros want to brand sure you take everything you see in the picture below on your arts and crafts table. After all, the last affair you desire to exercise is to make a gazillion trips to get this or that from another room.
Footstep 1: Draw a Semicircle
Offset upward, you're going to want to pull upwardly your white paper-thin piece. We advise yous to go a thin cardboard since you'll need to be able to easily scroll it afterwards.
Become yourpenciland depict a semicircle on the cardboard. It will be useful if you take a premade semicircle made out of paper so you can just trace information technology on the cardboard.
Make sure the trace is perfectly visible so y'all know where to cut during the side by side step.
Stride 2: Cut the Cardboard
Up next, you'll be needing your trusty crafting scissors.Brand sure to closely follow the drawing on the cardboard.
Step 3: Coil the Semicircle
Now that you accept a nice semicircle out of your cardboard, information technology's time to turn it into a Christmas tree.
We're going to do this by grabbing the ends of the semicircle with each hand and rolling them ane over the other, forming a cone.
Once yous're happy with the size of your cone, get the glue gun, plough it on, and apply some hot glue on the cardboard.
Once you take a thick line of glue on the paper, you tin press the sides together until the glue sets. In this way, you'll brand sure that the cone doesn't change shape before you're ready to decorate it.
Step 4: Cutting the Ribbons
Next, nosotros're going to kickoff preparing the actual ribbons. So, catch the outset ribbon strip and your pair of scissors and start cutting them. You'll want each strip to exist about an inch and a half long.
Continue cutting them until you have a big pile. You can cut out more later if you need more.
Repeat the process for the other ribbons, also. We take 3 colors for ours, only y'all can frankly use however many you have or want.
A bear upon of gold volition reflect the Christmas season quite well, especially if you lot don't overdo information technology.
There you go! You lot have three neat piles of ribbons now!
Step 5: Make Ribbon Loops
Now that you accept the ribbons set out, you lot can outset making the loops. You're going to demand the mucilage gun for this particular pace.
Simply take each piece of ribbon y'all cut earlier and overlap the top of the ends similar in the moving-picture show above. Add a pinch of hot glue to ane side and you're done. Just make sure to pinch the material for a couple of seconds to ensure the glue sets.
Do the aforementioned for all the ribbon strips yous cut then you tin can prepare them for putting them upwardly on your tree.
By the time you're done, you'll have three pretty piles similar these ones.
Step 6: Add the Ribbons to the Tree
Next, nosotros're going to add together the ribbons to the tree. You'll need the glue gun and the paper-thin cone you fabricated earlier.
Y'all want to beginning building up the tree from the bottom layer. Place one of the ribbons on the cone and measure out the area where you'll want to add together some hot glue. You want the length of the ribbon to comprehend the base of the tree, simply not surpass it.
Continue adding ribbon loops as you go. You lot can mix upwards the colors however you desire, alternate them.
Once you're done with the base layer, yous tin continue building up. The ribbon layers need to overlap a bit, and you'll want to make sure the empty areas are covered.
Continue calculation them upwardly in order to properly cover the cone.
Make sure to also glue a few at the peak, as well.
Step 7: Add the Tree Top
The last thing you have to exercise is to add the star at the top of the tree, much similar you do when setting up your own Christmas tree. Add a glob of hot glue at the very peak of the cone and add together the plastic star.
Ensure the star is there to stay by pressing it for a few seconds until the glue sets.
There y'all go! Y'all at present have a cute ribbon Christmas tree that tin reside on your mantle or table, or anywhere else where you lot put upwards decorations. It'south super easy to make and you lot tin can easily get the kids involved in this likewise. .
Source: https://www.diys.com/ribbon-christmas-tree/
0 Response to "DIY Christmas Decoration - A Beautiful Ribbon Christmas Tree"
Post a Comment